Marble flooring is a popular choice among builders and contractors. It raises the worth of a building and is the most durable material for a classic finish. As bougie as it may sound, but protection of marble floors is two times harder.
A natural stone that can survive the worst conditions is a marble. If used as flooring, it won’t rip, tear, bend, or scrape unless extreme natural disasters occur. Marble has been known to endure reasonably well even then.
Marble has endured over the ages, and in contrast to vinyl, carpet, and hardwood, it is still revered in art and architecture today. However, it needs extra care to survive for a long time. We recommend hiring marble polishing services rather than doing it yourself.
Avoid mistakes for the protection of marble floors.
The marble floor has a long history of being famous in ancient times. To this day, it has not lost its worth. However, avoid these four mistakes if you wish to keep it in good shape.
Allow spills to sit long.
Like any natural stone, marble has pores that let liquids seep beneath the surface, including water. If you’re not careful, this could result in bacteria buildup and difficult-to-remove stains. Because even water can create temporary dark spots in the stone if left to sit on an untreated surface, we always advise that spills be cleaned up immediately.
Wrong cleaning solutions
There are several cleaning chemicals you should never use because marble is a little more susceptible to stains. Although many of us are accustomed to cleaning with bleach, ammonia, and abrasives, none of these cleaning agents is required for cleaning marble floors.
Even vinegar, which is regarded as a kind of natural cleaning agent, is not allowed. In reality, it is not advised to clean marble surfaces with any acidic substance, whether natural or artificial. Expert marble polishing services have all the right solutions for cleaning.
Irregular mopping
Sand, mud, and dirt are abrasive to stone flooring and may harm the surface over time. Doormats should be kept both inside and outdoors to try to catch this debris and stop these scuffs from happening.
Before walking on your marble flooring, it’s also a good idea to be aware of what you’re tracking in and wipe your feet as effectively as possible within reason. Use a dry, clean dust mop to get rid of any dirt that has been tracked in without damaging the floors.
To best capture all the material, move the dry mop in a single path, not back and forth. It is not advised to use a vacuum since, over time, they can make these marks worse. If you live in a dusty region like Dubai, hire marble polishing services for perfection.
Not sealing marble floor.
The terrible truth is that marble is more porous than other natural stones, like granite, despite its allure and status. Given that, Sealer Wipes, it’s even more crucial to preserve the barrier that was put in place when the stone was set. This is necessary to keep the marble you spent so much on looking shiny and clean.
Best time to seal
Resealing your stone is generally advised every 6 to 12 months, depending on usage, but the water test is the only way to be sure.
Water test
Spread some water on the surface with a circle of about 3 inches, then leave it for 30 minutes. It’s time to reseal if you notice a black spot or ring where water has penetrated the stone. Before sealing, make sure to give the surface a thorough cleaning.
How to seal marble?
- Complete the sealing in around 3-foot chunks. Spray a uniform layer of Granite Gold Sealer over the area, then quickly buff the solution into the marble with a fresh microfiber cloth.
- Buff the area with another clean microfiber after applying the Sealer until the surface feels dry to the touch between applications (20 minutes should be plenty).
- Repeat the method two or three times for the best results.
Routine care of marble floors
You can hire professional marble polishing and cleaning services for your home and offices. However, if you want to know about the annual cleaning process, we have prepared this fantastic guide. You can treat marble floors all by yourself in four simple steps.
Cleaning
After thoroughly wetting the surface, scrub it with a clean fiber brush and a gentle, nonabrasive detergent. Rinse thoroughly with a flood of hot, clean water, then repeat the washing process as necessary. Eliminate all traces of detergent after the last rinse. Wipe dry with a fresh, lint-free cloth to avoid staining.
Removing stains and spills
Oil, organic, and rust stains should all be treated differently from ordinary ones. For advice on the best cleaning and how to remove stains from your specific floor and stain issue, speak with a local flooring professional.
Polishing the floor
With extra-fine #400A wet- or dry sandpaper, smooth any areas that seem rough due to minute scratches or other flaws. When the surface feels smooth, wipe it clean, then quickly rub the area with water and tin oxide powder to make it shine. After that, wipe off with a fresh, moist cloth. If necessary, repeat.
Waxing
In the end, apply a generous layer of premium quality wax. Buff the floor using lamb’s wool or any other soft cloth for application.
Professional care for marble floors
Always clean your marble floor using the most delicate methods available. You can maintain it free of surface grime by regularly cleaning your marble floor using a cotton string mop and a small amount of plain warm water.
Use only neutral cleaners or stone soap liquid made especially for natural stone that won’t damage the surface or diminish its brilliance.
For Protection of marble floors, contact ProCleaning in Dubai and book an appointment!